হাউজিং এন্ড বিল্ডিং রিসার্চ ইনস্টিটিউট এর টেষ্টের ফি সমূহ

নির্মাণ উপকরণ পরীক্ষণের দর

Quality control measure is the primary criterion of any standard material. The performance of a product will only be sustainable if its quality is properly controlled through conducting standard tests in a well equipped laboratory. It is also ture in case of construction system where huge amount of construction materials are used involving lot of investment. Housing and Building Research Institute has the laboratories to facilitate all sort of standard tests according to the specification. A few of the available tests and their costs are indicated below.
Physical Tests	Effective from MARCH 01, 2015
Sl. No. Name of Tests Unit Rate in Taka(Excluding VAT) A. AGGREGATES 1. Abrasion (L.A.) 1 4,000.00 2. Sieve analysis/F.M. of fine aggregate 1 1,500.00 3. Sieve analysis of coarse aggregate 1 2,500.00 4. Sp. gr. and absorption of coarse aggregate 1 2,500.00 5. Sp. gr. and absorption of fine aggregate 1 2,500.00 6. Total moisture content of aggregate 1 2,500.00 7. Relative density and absorption 1 2.500.00 8. Unit weight (bulk) of aggregate 1 1,500.00 9. Voids in aggregate 1 3,000.00 10. Materials finer than No. 200 sieve by Washing 1 2,000.00 11. Soundness 1 1,500.00 12. Clay lumps and friable particles in aggregate 1 2,300.00 13. Crushing strength of boulders. 1 3,000.00 14. Crushing value 1 3,000.00 15. Organic impurities in sand for concrete 1 2,000.00 16. Flakiness index 1 3,000.00 17. Elongation index 1 3,000.00 B. BRICK, TILES, REFRACTORIES ETC. 1. Crushing strength(Set of 5 Nos.) 1 Set 2,500.00 2. Absorption(Set of 5 Nos.) 1 Set 1,500.00 3. Size and Shape(Set of 5) 1 Set 2,000.00 4. Efflorescence (Set of 10 Nos.) 1 Set 2,500.00 5. Modulus of rupture(set of 5) 1 Set 2,500.00 C. CEMENT 1. Compressive Strength 1 Set 6,000.00 2. Tensile strength 1 Set 6,000.00 3. Setting time 1 Set 2,500.00 4. Normal consistency 1 2,000.00 5. Specific gravity 1 3,000.00 6. Specific surface 1 5,000.00 7. Autoclave expansion 1 12,000.00 8. Heat of hydration 1 6,000.00 9. Flexural strength of cement mortar 1 3,000.00 10. Fineness by the No. 100/200 sieve 1 2,000.00
D. CEMENT CONCRETE 1. Compressive strength of cylinder 3 1,500.00 2. Cylinder (casting & testing) 6 12,500.00 3. Compressive str. of cube 3 1,500.00 4. Cube (casting & testing) 6 12,500.00 5. Core Cutting & Testing without Scanning excluding field visit 1 5,000.00 6. Core Cutting & Testing with Scanning excluding field visit 1 10,000.00 7. Design of concrete mixes. without Admixture(/str.) 1 30,000.00 8. Design of concrete mixes. with Admixture(/str.) 1 40,000.00 9. Flexural Str. of beam (centre pt. loading) 1 Pl. Call 10. Flexural Str. of beam (third pt. loading) 1 Pl. Call 11. Impact Hammer Test without field visit 3 Spot 3,000.00 12. Unit weight, yield & air content 1 1,500.00 E. STEEL MATERIALS/M.S BAR 1. Tension & Elongation 3 1,750.00 2. Elongation (ductility) 3 1,750.00 3. Weight of M.S. Bar 3 1,000.00 4. Bend Test 3 900.00 5. Stress-strain curve (per curve) 1 6,000.00

মৃত্তিকা পরীক্ষণের মূল্য তালিকা

S.L. no	Name of the Work	Unit	Approved Rate (TK) excluding Vat
1	Preparation, Packing and Transportation of Drilling	LS	Actual cost
2	Installation of Drilling Equipment at side	Each site	3,500.00
3	Installation of water supply arrangement & minor repair	Each site	2,700.00
4	Setting up temporary accommodation for staff at site	Each site	2,600.00
5	Execution of boring : (meter)
	a) Between 0 m. to 15 m.	Per meter	230.00
	b) Between 15 m. to 30 m.	Per meter	270.00
	c) Between 30 m. to 45 m.	Per meter	350.00
6	Making platform for execution of Boring in water	Each	Actual cost
7	Idle time due to non availability of point	Day (8 hrs)	3,600.00
8	Collection of Disturbed samples at every 1.50 m.	Each	135.00
9	Collection of Undisturbed samples by Shelby tube	Each	220.00
10	Execution of Standard Penetration Test :
	a) Between 0 m. to 15 m.	Per meter	85.00
	b) Between 15 m. to 30 m.	Per meter	120.00
	c) Between 30 m. to 45 m.	Per meter	140.00
11	Cone Penetration Test
	Between 0 m. to 15 m.	Per meter	2,200.00
S.L. no	Name of the Work	Unit	Approved Rate (TK) excluding Vat
1	Specific Gravity	Each	1,600.00
2	Natural Moisture Content	Each	850.00
3	Visual Inspection and Classification	Each	135.00
4	Sieve Analysis	Each	850.00
5	Sieve and Hydrometer Combined Analysis (Including Sp.	Each	2,200.00
6	Unit Weight (Wet & Dry)	Each	1,650.00
7	In- situ Density Test(Excluding field visit)	Each	6,500.00
8	Liquid Limit & Plastic Limit	Each	3,000.00
9	Shrinkage Limit	Each	1,400.00
10	Porosity, Void Ratio and Degree of Saturation	Each	2,700.00
11	Unconfined Compressive Test :
	a) Undisturbed	Each	3,400.00
	b) Remolded	Each	2,600.00
12	Compaction Test :
	a) Standard AASHO	Each	5,500.00
	b) Modified AASHO	Each	6,400.00
13	One Dimensional Consolidation (Full)	Each	13,500.00
14	One Dimensional Consolidation Test
	(e-log p)	Each	11,200.00
15	Direct Shear Test	Each	4,300.00
16	Tri axial Shear Test :
	a) Unconsolidated Undrained	Each	10,500.00
	b) Consolidated Undrained	Each	14,500.00
	c) Consolidated Drained	Each	7,200.00
17	Permeability Test
	a) Cohesive	Each	11,000.00
	b) Non-cohesive	Each	5,200.00
18	Differential Swelling Index	Each	4,500.00
19	Swelling Potential	Each	8,300.00
20	Preparation of Final Report (Each set of five copies)	Each set	5,500.00
21	Bearing Capacity Analysis	per meter	335.00